Net belt type full automatic net filter

The filter of this series of net changer is made up of a filter mesh belt of 10 meters or 20 meters, heating, cooling series and electric control system. No external power is required, and the network is automatically controlled by the pressure activated drive device. There is no fluctuation in material flow and no deformation of the product in the process of changing the net. Suitable for: PP, PE, ABS, PS, PMMA and other plastic melts, widely used in all kinds of thin film, sheet, sheet, high quality, fiber, wire drawing, granulation and other products.

The application field of single board and double station hydraulic screen changer is suitable for sheet, sheet, pipe, film covering, blowing film, wire, cable, profile, granulation, etc. suitable for all thermoplastic plastics.

The characteristics of the single board and double position hydraulic screen changer are:

1. The whole structure is adopted in this series. It has the characteristics of small volume and short flow passage, which can be used with different standard extruders.

2, the pressure driven seal technology can be automatically compensated for the sealing clearance to meet the high extrusion output of any polymer material, without stopping or missing material.

3, the hydraulic pumping station is equipped with a pressure storage device, an extruder mesh changer, and a dual station fast changing network time less than 2 seconds.

4, under pressure 25-30Mpa, the temperature is as high as 300 C, without affecting its performance. 5. Select the filter area 50- 360mm. Structure and parameters of single plate double station hydraulic changer.