What is a mesh belt automatic mesh filter

The filter of this series consists of a filter belt with a length of 10 meters or 20 meters, a screen changer body, a heating/cooling system, and an electrical control system. No external force control is required, which can effectively increase production, save energy, and reduce costs compared with manual screen changing. Extrusion screen changers can be installed on any new or existing extruder, melt pump, reactor or other extrusion line. It can be used to filter any type of polymer, rubber or ceramic melt. Applicable materials: PP, PE, ABS, PS and other plastics, rubber melt. It is widely used in the production of high-quality and long-process products such as cast film, film, sheet, plate, optical fiber, various wire drawing and granulation.

The automatic hydraulic extrusion screen changer is a fully automatic screen changing device in the true sense. It adopts a mesh belt filter screen, which automatically moves the screen according to the material pressure, and does not need to manually change the screen until the filter screen is taken away. It is suitable for all kinds of granulation. Production Process. The mesh belt type automatic screen changer basically has no material pressure fluctuation (the control range can be set), and no power is required to change the screen. The limitation is that the water-cooled seal is adopted, and the outlet heating is activated to run the net when the net is traversed. There is a certain time process, and the time interval for changing the net is required to be more than 30 minutes before automatic net travel control can be realized. The cost of the filter belt is relatively high, and at the same time The waste brought out by the mesh belt is relatively large.

The mesh belt screen changer is suitable for the extrusion process of plastic, rubber and resin products. Welcome to consult and purchase, info@battemachinery.com.