Pelletizing non-stop screen changer

Pelletizer polymer screen changers are mainly used in the production of pelletizing, PE, PP, PPR, PERT pipes, plates, sheets, cast films, nonwovens, chemical fibre spinning, etc. where the flow of material is not interrupted during screen change and where continuity is required.

When the pelletizer is working, the two filters work at the same time, when the screen needs to be changed, you can start the hydraulic station to change the screen action, when the screen is replaced, one screen works, one screen is replaced, the two screens alternately change the screen, through the introduction of material and exhaust device, the air in the flow channel will be clean and achieve the production requirements of no stopping to change the screen, no leakage of material, material flow is not interrupted, material pressure fluctuation is small, the impact on production is small, good continuity.

plastic pelletizing screen changer configuration scheme

1, main body of the screen changer (oil cylinder, heater), standard hydraulic station (oil pipe 2m) (standard configuration of the Batt screen changer).

2, screen changer main body (oil cylinder, heater), standard hydraulic electric control combination system (pressure sensing, pressure alarm, independent temperature control system).

3, main body of the screen changer (oil cylinder, heater).

4, Main body shroud (optional).

Email: info@battemachinery.com

Whatsapp: +86 158 38331071