Hydraulic screen changer installation direction of several forms of introduction

Extruder hydraulic extrusion screen changer installation direction generally according to the extruder site conditions and operating preferences can be divided into the following ways:

1, the cylinder upward installation using this way of installation, easy lifting, overall beauty, occupies a small space; the bad thing is that the cylinder is on the top, the seal inside the cylinder has a short life, easy to leak oil, seal replacement is frequent. The oil pipe is long.

2, cylinder horizontal installation according to space and ease of operation using the cylinder to the left or right horizontal installation, this way is common is also a convenient way to change the net; bad place is individual site is not convenient to enter the left or right, resulting in the other side of the net is not convenient.

hydraulic extrusion screen changer

3, the cylinder downward installation of the cylinder downward installation, occupying a good space, will not affect the other devices caused by interference, easy to change the network. Some equipment will have interference below; installed downward, you will not see the polymer screen changer.

4, cylinder tilt installation because of individual equipment installed with interference, or flange can not be rotated, so we have to use this installation, installed after the appearance is not too beautiful, does not affect the operation of the application.

polymer screen changer

Multi-machine common hydraulic station can be based on the site of the production line layout using different installation methods.

Email: info@battemachinery.com

WhatsApp: +86 158 38331071