batte melt pump

Advantages of plate type non-stop screen changer for wire drawing

In the wire drawing production process, PET, PP and other materials are often added, resulting in a large number of dirty impurities mixed in, so the melt needs to be filtered. Adopting a plate-type double-station non-stop hydraulic plate screen changer for filtration has the following advantages: hydraulic plate screen changer Firstly, there is no need to cool down and warm up, thus reducing the loss of electrical energy. Secondly, there is no stopping and dismantling of the machine, which impr

Double plunger screen changer for modified granulation

Modified granulation raw materials have fewer impurities and higher value. In terms of the selection of wire hydraulic extrusion screen changers, double column and double station wire screen changers are generally selected for wire rod production to achieve the goal of continuous wire screen changing. It is suitable for production requirements such as granulation, pipes, sheets, chemical fibers, cast films, and various chemical solvents that require uninterrupted material flow and high continuit

Non stop dual station screen changer for hot melt adhesive coating machine

The production of polymer self-adhesive film waterproof rolls requires the use of a hot melt adhesive coating machine, which is equipped with components such as a glue melting box, mesh changer, and coating mold. Previously, the screen changers configured on old-fashioned production lines were all single station screen changers. During the production process, it was found that the existing single station screen changers had the following defects: they could only be produced intermittently; After

HDPE corrugated pipe double column screen changer

In response to the characteristics of the HDPE pipe production process, such as high yield, high temperature, high filtration accuracy, high viscosity, low pressure fluctuations, high stability and reliability requirements, Zhengzhou BATTE provides a dual column dual station screen changer for HDPE pipes based on the above process characteristics. polymer screen changer for HDPE pipe extruder When replacing the HDPE corrugated pipe double column mesh changer, one mesh works and the other mesh is

Four steps to correctly install the extruder screen changer

The hydraulic extrusion screen changer of the extruder is usually used in conjunction with the extruder, which can adjust the diameter of the extruder screw from 45mm~ Suitable for use between 320mm. Based on years of experience, the installation of the extruder screen changer is explained in the following four steps. continuous screen changer 1. Dismantling the mold First, heat up the flange connecting the extruder and the mold in advance, and then stop the machine to disassemble the mold after

  • HOME
  • PRV
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • NEXT
  • END

Chat live
Fax:+86 371-67993277
Tel: +86 371-67991755
Sales direct: +86 15838331071
E-mail:sales@battemachinery.com
http://www.extrusionscreenchanger.com
24h services
batte melt pump

More about screen changer products:

extrusion hydraulic screen chan

extrusion screen changer

batte hydraulic extrusion scree

Double column screen changer

Continuous belt screen changer


©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould