batte melt pump

Hydraulic double screen changer for plastic extruder

The plastic extruder hydraulic double screen changer is suitable for pelletizing, PE, PP, PPR, PERT pipe, sheet, sheet, cast film, non-woven fabric, chemical fiber spinning and other production that requires uninterrupted material flow and high continuity when changing the screen. The pet double screen changer is designed with two columns and two runners, with two screens working at the same time. When changing the screen, one screen works and one screen is replaced without stopping to change th

Pet Cast Film Extrusion Line Continuous Screen Changer

The production process of cast film is that the resin is melted and plasticized by the extruder, then extruded from the head through the slit die opening, so that the molten material clings to the cooling roller, and then stretched and slit and rolled. hydraulic screen changer is indispensable in cast film production line, because of the many functions of cast film products, high requirements, and harsh processing conditions, the requirements for screen changer are very strict; the following Zhe

Polymer melt filtration manual hydraulic screen changer

The Manual Skid Plate Hydraulic Screen Changer provides plastics processors with an economical and efficient way to filter contaminants from the polymer stream. Used for blown film, laminating, masterbatch, recycling, sheet extrusion, profile extrusion, pipe production, pipe coating and biaxial orientation, the manual polymer screen changer can be used to filter virtually any type of thermoplastic material. Compact design eliminates the need to disassemble the line and use the handle or optional

How to distinguish between single-board duplex screen changer and single-board continuous screen chan

The single-plate extrusion screen changer has two filtering stations on the filter plate, while the single-plate continuous four-station screen changer has four independent porous plates, which is the difference in its internal structure; for the inst

Analysis of working conditions when the hydraulic station is not running and there is no pressure

When the hydraulic station is not operating normally, look at. 1. whether the power supply is connected (380V) 2, whether the power switch in the control box of the hydraulic station is pushed up. 3, whether the hydraulic station is not filled with 46# anti-wear hydraulic oil. When the hydraulic station motor is running but there is no pressure, it should be noted that. 1, whether the motor reverses (counterclockwise), such as reversing, the hydraulic station electric control box in the three po



©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould